Hello,
I have some troubles with the genie SX-150.
I've tried a lot bit it wont exist.
The machine is a genie sx-150
SN: SX15015H-147
Year : 2016
Software of the machine is:
Tcon : v1.10
Pcon : V2.11
Scon : V1.10
The problem is the machine gives some fault between : Tcon/Scon calibration inconsistent.
So the boom wont go up and don't want to extend ( also I won't drive ).
I did many times the calibration per manual instruction and it wont help.
Some times the fault leaves and after 2 hours I came back.
Ive I look at the parameters or run screen of the Tcon or Scon with Webgpi I don't see something strange.
Nothing strange with the angle sensors or length sensor.
any help?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.