The P2-26 refers to the connector pin on the operator control board. P2-26 is for the FaST side brush valve (solenoid valve to turn on the FaST soap pack to the side brush). From what you've described, the P2-26 code that comes up after you run the self-test is indicating a problem with that particular function. This is a separate issue from the engine stalling.
On that note, the engine stalling could be an issue with the connection to the the ECM or a faulty ECM. Get a wire schematic for the ECM and M30 to help guide you through the many wires to the ECM. Best of luck!
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.