I've got a CAT ep15krt forklift that will drive forwards backwards etc absolutely fine however it seems like it's low on torque or power? You get to a slight slope and it will not drive up it even when not loaded, it seems like it needs a run up to get anywhere really.
There is a code on the dash ep030?
Hydraulics and everything else works fine it's just got no torque.
I've visually checked the 3 boards that control it and I can't see anything burnt or any dry solder joints, the batteries are all reading 2.04v each (x12=24v). I'm leaning towards an issue in the drive motor but would like to know if there is any more parts that I can check before pulling the motor and getting it tested?
Thanks! Any help much appreciated!
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.