1. Home
  2. Forums
  3. Report post

Report this forum post

I tried a different block from the other lift that is up and running. The one with the two larger rectifiers and the rectangle device next to them. I swapped the whole block, still nothing. The block I removed from this one works on the running forklift so I will leave it be.
  • Posted 25 Jun 2019 04:07
  • By jackson_p
  • joined 18 Jun'19 - 66 messages
  • Tennessee, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.

Showcased in the Virtual Expo

Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.
Your Focus
Tom Ryder
Right-sizing your forklift fleet: the hidden opportunity for operational excellence
Tom Ryder
Read blog
Read more Your Focus blog articles
From the forum discussions …
"Linde H16T EVO 2017 running rich - Thanks to Gold Award Tech John_Bradley: That is the trim valve, the lockoff mounts on the vaporizer or in line to LP tank... And check for any ghost codes."
John_Bradley, United States
Read & Post in our Forums
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.