I cant seem to find any info on how to remove the rear steering shaft from the cylinder that is part of the axle housing on our 2008 skytrak 10054 fork lift. I have the shaft disconnected from the axle joint to the tie rods. I have removed the slotted nut from one side of the cylinder and the snap ring from the other side but am unable to get the shaft to pop out. I don't see what is missing. ive looked for a set screw of all types and found none. any help on the removal process would be greatly appreciated. the axle model is a MS-T3055 and serial # is 1566662
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.