ok so i have had a chance to get back to this lift the first test it fails is the lift circuit test when i increase the current nothing happens. no lift or current increase i have followed everything in my book it goes back the replace the vehicle manager on this test
test A12 show my 6 volts when im at 0 amp when i go to lift the forks nothing change no voltage reading or amperage
test I05 passes test I14 passes
test I15 will show no when you enter the test as it should when you go to lift the forks it still shows no

any help would be great this lift is kicking my butt the lift worked great till it got sprayed with water not only did they get one but they didnt learn an got two lifts i have replaced everything on the lift heat sink an have had no luck