Discussion:
Dash doesnt light up AND no start??

I told my buddy I would have a look at his forklift. Not sure the year but seems "newer". The complaint was NO START. First thing I noticed was the dash screen or any lights do not light up at all. I thought Id start by looking at the diagnostic codes......but the screen doesnt light up. The forklift cranks but will not start.
So before I went in too deep......Is there a relation here? Should it matter if the screen doesnt light up? Or is this telling me the ecu/computer is dead or?? fuse or??
K25L Nissan engine. Unsure of year?
Thanks for the help!!
  • Posted 16 Oct 2022 04:22
  • By Jinxie
  • joined 27 Jan'18 - 19 messages
  • Manitoba, Canada
Showing items 1 - 6 of 6 results.
Hello,
Please advise if you found the solution and what was the issue. I have exactly the same issue. I appreciate your advise a lot!
  • Posted 17 Mar 2025 12:01
  • By Region64
  • joined 17 Mar'25 - 1 message
  • Florida, United States
Vladimir
I know this thread is old but I have the exact same problem. Did you find the cause?
  • Posted 16 May 2024 11:22
  • By Topi
  • joined 16 May'24 - 2 messages
  • Oklahoma, United States
Jonathan
I'm having the same problem with my forklift, what did you find out?
  • Posted 15 Oct 2023 10:45
  • By Jason_Hazelwood
  • joined 15 Oct'23 - 1 message
  • Virginia, United States
Jason Hazelwood
Found it!
  • Posted 16 Oct 2022 05:55
  • By Jinxie
  • joined 27 Jan'18 - 19 messages
  • Manitoba, Canada
Ok so I pulled the plug from the bottom of the fuse block there were only 2 wires there in the plug. But when I jumped 2 out of the 3 pins at the bottom of the fuse block the dash lit up! And it starts!!
So, does anyone know where I can get a schematic? Im close....just need to understand what I jumpered and where the other ends of these 2 wires go,
Must be an ignition relay somewhere?
  • Posted 16 Oct 2022 05:06
  • By Jinxie
  • joined 27 Jan'18 - 19 messages
  • Manitoba, Canada
I tested for power in the fuse block

NO POWER at these fuses (These 6 are beside each other)
VCM
QGS/OTHERS
METER PANEL
BACKUP/OTHERS

These fuses HAVE POWER
WORKINGLAMP
ETC
A/C
WIPER
HEADLAMP
HORN
STOMPLAMP
EGI
EGI

So.....Where does my power for the first fuses come from? Relay?
  • Posted 16 Oct 2022 04:51
  • By Jinxie
  • joined 27 Jan'18 - 19 messages
  • Manitoba, Canada

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Movers & Shakers
Jeannette Walker Jeannette Walker
CEO, MHEDA
President, European Rental Association (ERA)
Chief marketing officer, JLT Mobile Computers
Chief executive officer, East Penn Manufacturing
Latest job alerts …
Columbia, SC, United States
Indianapolis, IN, United States
East Syracuse, United States
Saratoga, United States
Toyota 4FD240
Yokohama, Japan
Used - Sale
Nagano NUZ090D
Yokohama, Japan
Used - Sale
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025