1. Home
2. Forums
3. Design & Engineering

Discussion:
MOTOR LOCKED --- ALARM IN MODULE 06 ---- HYSTER R1.4

Good day to everyone. I am working with a HYSTER R1.4 of the year 2007 and by the SICOS and also by the console I read this:

ALARM IN MODULE 06
LOCKED MOTOR

The steering motor is OK, the steering motor encoder is OK, the position sensor is OK....... ufffffff
Sometimes everything works correctly but suddenly it stops and sends that error.

Somebody can help me ????? Thank you

• Posted 25 Jan 2018 06:00
• Discussion started by alberto_sic
• Valencia, Spain

:-)

Post a ReplyReport this post

helpfully.

• Posted 18 Sep 2019 16:20
• Reply by Ibrahimk
• Saudi Arabia

Ibrahim A

Post a Reply Report this post

Thanks for your suggestions.
Finally everything was fixed by changing the EPS-AC controller to a new one.

• Posted 12 Feb 2018 05:34
• Reply by alberto_sic
• Valencia, Spain

:-)

Post a Reply Report this post

It will be the motor encoder these are very problematic on the matrix, I've changed loads of the things. One thing to be careful of don't damage th new encoder while fitting it they're extremely fragile

• Posted 25 Jan 2018 23:39
• Reply by lifter01
• West Yorkshire, United Kingdom

Post a Reply Report this post

Troubleshooting guide says the problem is in the encoder or the wiring. Test the wiring from the encoder to the EPS controller.

• Posted 25 Jan 2018 09:20
• Reply by BREWSKI
• Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.