1. Home
  2. Forums
  3. Technical Troubleshooting

Doosan (& Daewoo) BC25S-5:
logic board

Does anyone know if you have to flash or update anything with a lap top when you replace the logic board ( oem) with a new one. installed new logic and the unit goes completely crazy. i was able to calibrate my sensors , steer, hoist and accelerator pedal. Unit acts very strange. can install original board and unit runs normal for the most part. original problem is a little tricky to explain. i though i would start with logic board. Unit has the CME controls.
  • Posted 31 Dec 2019 07:57
  • Discussion started by keith_m
  • Texas, United States
keith@kmcforklift.com
Post a ReplyReport this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Maersk opens French warehouse Hauts-de-France, France
Forklift Diaries
From the forum discussions …
"JLG 2630ES:...These lifts pots can be a hassle...if you replaced them..make sure you changed wiring..they come set normally open..."
Matthew_Reed, United States
Read & Post in our Forums
Upcoming in the editorial calendar
ARTIFICAL INTELLIGENCE
May 2025
Ask us about editorial contribution
From the forum discussions …
"Remove the coils and ohm out the pins. Coils take a different number than regular 4y plugs... If code is there then it is an ecu issue."
ron_k, United States
Read & Post in our Forums

PREMIUM business

Hawker Powersource, Inc.
HAWKER® offers a range of hybrid motive power solutions customized to adapt as your operation's needs change.
Hawker Powersource, Inc.
Upcoming in the editorial calendar
ARTIFICAL INTELLIGENCE
May 2025
Ask us about editorial contribution
Maersk opens French warehouse Hauts-de-France, France

PREMIUM business

Hawker Powersource, Inc.
HAWKER® offers a range of hybrid motive power solutions customized to adapt as your operation's needs change.
Hawker Powersource, Inc.
From the forum discussions …
"JLG 2630ES:...These lifts pots can be a hassle...if you replaced them..make sure you changed wiring..they come set normally open..."
Matthew_Reed, United States
Read & Post in our Forums
Movers & Shakers
Linda Häkkilä Linda Häkkilä
Linda Häkkilä
vice president, Investor Relations, Konecranes
Rhiannon Stone
vice president operations, Elokon Group
Bennit Schmieder
President, EP Equipment Europe
Mathias Höglund
Senior vice president human resources, Kalmar