i had the valve body sent off to be repaired due to the forks drifting when it returned the problem is worse than before now whe i try to tilt it forward it raises to max heigth before tilting forward when i tilt back it will til bottoms out then raises this lift does not have side shift and if you hit side controls it raises all wiring is correct and it is an elctronic valve body thank you
Showing items 1 - 9 of 9 results.
Check out the relays for the controls I have had this issue once before on older mitsubishi esr relay welds it self together and no matter what I would touch control wise the welded contact function would operate
hi
Did you manage to calibrate your valve. If so, can you let me know how to do it please..Thanks
Have an email to put in your profile?.
I will have to get back with you in the morning on that I have already left the shop
What is the serial number of the truck?
We also tried it before pulling valve body
We tried a reman one that we have extra same outcome
Sounds like the electronic controls need to be calibrated. This may have been the problem in the first place.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.