SKYJACK SJIII 4632
This darn machine will go only up about 82" (ground to floor) and STOP, same place every time. I am electrician of 31yrs, and I am beginning to think I gotta go back to trade-school!!!! This is driving me crazy!
It drives fine, steers fine, DOWN is fine.......but all of a sudden it stops at 82" when given an UP command!
Machine is level.....totally level. Batteries are full. Lift is empty (no load). Oil reservoir full. Does this with platform and base controls, either or, same problem.
When I manually rotate the lobe (at the safety limit switches on the rear-side scissor X frame members) that actuates the limit switches, it permits me more distance for UP travel. I know I can't rotate these lobes to suit my interests as they've been set for a reason.
Does anyone know why a lift would go up and stop when one of those safety limit switches is actuated?
Showing items 1 - 1 of 1 results.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.