1. Home
2. Forums
3. Technical Troubleshooting
4. Jungheinrich
5. ETV 214

Jungheinrich ETV 214:
Lift 107

ETV 216 error 019 lift and CONTROLLER

• Posted 30 Nov 2023 04:55
• Reply by Ahmed_Saber
• Egypt

Post a Reply Report this post

Did you change any boards on this equipment?

• Posted 6 Jun 2023 04:45
• Reply by edmar_p
• Guarulhos SP, Brazil

Edmar

Post a Reply Report this post

Tks for advice, i had check two pins of drive controller ( 08 & 36 ), it is 48v same from battery , but the lift truck ETV320 2008 still get error 107. Have any solution or change controller ?
Regards,

• Posted 5 Jun 2023 16:10
• Reply by dai_v
• HCM, Vietnam

Post a Reply Report this post

107 Key switch voltage out of range or incorrect hardware encoding

• Posted 15 May 2023 23:53
• Reply by Forklift123
• Netherlands

Mechanic of Forklifts, Aerial platforms & telehandlers in the Netherlands

Post a Reply Report this post

Please contact me on WhatsApp 03123775090

• Posted 13 May 2023 22:18
• Modified 13 May 2023 22:20 by poster
• Reply by Syed
• Sindh, Pakistan

swasiquehussain at gmail dot com

Post a Reply Report this post

Nameplate and picture of the display

• Posted 13 May 2023 22:06
• Reply by imad_b
• oulfa, Morocco

imadi.bakhat@gmail.com
+212663576104
crdt

Post a Reply Report this post

Hi, first of thanks for replying.
I already check battery voltage. But i didn't check pins voltage i check...thanks

Can you please send me your WhatsApp number for more disscuion.

• Posted 13 May 2023 15:33
• Reply by Atif_Rasheed
• Pakistan

Post a Reply Report this post

Check for battery voltage, key switch connections and voltage on both pins.

• Posted 13 May 2023 14:46
• Reply by Tanel_M
• Estonia

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.