Hi,
I have Atlet ums 160. Reach truck
No 5 volt supply. Can't calibrate accel, break and hydraulic (levers). Defected Atc and display are changed.
Someone have experience? Appreciate any help.
Showing items 1 - 3 of 3 results.
hello ,
did you mange to solve this issue ?
Please explain what you did and what repairs are done, my atlet uns200 is having the same issue.
After start, the hydraulic will be stopped, the display shows "Acceleration failure" and the fault code E48.
I changed ATC computer and display because the were damaged. Don't know reason what's happened.
And now I get error code E 49 that's mean something wrong with accel. I get on display hydraulic stopped too. Tried to calibrate accel, break pedal and levers but I get calibration failed.
Find out that I missing 5v supply on the plinth (many pink wires) beside the contactor. Checked wires and it looks good.
Hi,
Can you be more specific?
Where you don't have the 5v?
You have any error on the display?
What are the symptoms?
I didn't understand what's with the ATC and display?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.