Hyster H3.0FT:
Error code Track disable

Dear all ,

kindly help me for this problem the forklift Hyster H3.0FT is starting normal but is giving on the dashboard Track disable and error code: 524245-4. the machine is not operating and moving.

best Regards.
Dib khanji

• Posted 3 Jun 2015 20:04
• Modified 3 Jun 2015 20:07 by poster
• Discussion started by dib_k
• lagos, Nigeria

Dib khanji

Post a ReplyReport this post

Hey could you please help me with the service manual or at least the part with the codes of a Hyster E2.50xm F108 c252735
Thank you very much

• Posted 18 Dec 2015 11:13
• Reply by aaron_s
• Limburg, Belgium

Post a Reply Report this post

Dear BREWSKI,

Thanks again for your help you were wright as always , i appreciate your Reply.

• Posted 26 Jun 2015 17:33
• Reply by dib_k
• lagos, Nigeria

Dib khanji

Post a Reply Report this post

That is ign 3 voltage low. recck all the fuses.

• Posted 26 Jun 2015 03:02
• Reply by BREWSKI
• Nebraska, United States

Post a Reply Report this post

Dear Brewski ,

please can you help me again for those error codes.error code 676-4 the forklift is not starting (truck is disable ) and giving another error code : 522762-4

• Posted 25 Jun 2015 17:53
• Reply by dib_k
• lagos, Nigeria

Dib khanji

Post a Reply Report this post

Dear BREWSKI ,

You were right thanks for your help

• Posted 5 Jun 2015 20:32
• Reply by dib_k
• lagos, Nigeria

Dib khanji

Post a Reply Report this post

The code you listed is operator presence sensor reading low. Check the seat sensor and wiring.

• Posted 5 Jun 2015 01:53
• Reply by BREWSKI
• Nebraska, United States

Post a Reply Report this post

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.