Engine not starting - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster L177B 16936E (2007)3TON:
Engine not starting

Hi,sir We had done water wash and air cleaned it after that machine started well after an hour fault indicater no 96-4 came and we checked all the sockets removing and cleaning and fixed back after that now the engine is not starting only dashboard light and one round light with spanner shows and fault no 676-3 and 96-4 is flashing,please suggest me for this problem.
Thanks & Regards
Felix Dsouza

Posted 9 Jan 2015 18:32
Discussion started by felix_d
UAE, United Arab Emirates

Post a Reply Report this post

Showing items 16 - 17 of 17 results.

Sort messages by:

yes i checked all the connectors they were not wet but still i removed and fixed back all indicators come when we on the key but 1 indicator with yellow round with spanner pictuture does not go and engine also not starting is there any password or any callibration needed but after water wash forklift was working for 1 day please let me know what else to be done.Thanks

Posted 10 Jan 2015 04:39
Reply by felix_d
UAE, United Arab Emirates

Post a Reply Report this post

676-3 is a glow plug relay reading high. This would be on a diesel unit. 96-4 is a LPG fuel level sensor reading low. This is for a LPR unit. Sounds like you have a VSM connector that is wet. Did you remove and dry out the connectors on the VSM? It is located under the dash cove on the right hand side.

Posted 10 Jan 2015 00:34
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.