Code F5 - Technical Troubleshooting discussion in Forkliftaction's forums

Raymond EZR40TT:
Code F5

The code F5 comes up almost as fast as I turn the key on. The transistor module was shorted so I've replaced it and the diode on the heatsink. Still get the "code F5". I Need to know what that code is trying to tell me.

Posted 18 Nov 2012 23:09
Modified 18 Nov 2012 23:10 by poster
Discussion started by gusbus49
Florida, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

VFC is the flat card mounted to the system card. It is held in place with 4 screws... You may be able to swap to a know good truck...
It is normally replaced as a board

It sounds like you are at the call a Raymond tech stage though

Posted 19 Nov 2012 13:19
Modified 19 Nov 2012 13:20 by poster
Reply by JonG
United States

Post a Reply Report this post

Thank you for the help and I don't mean to sound like an idiot but what is the "vfc" and is this a component I can work or it one of those that I need a Raymond tech for.

Thank you again for your help.

Posted 19 Nov 2012 09:18
Reply by gusbus49
Florida, United States

Post a Reply Report this post

Fault in the vfc

Posted 19 Nov 2012 05:48
Reply by patrick_b
Alberta, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.