Hello,
First time, sorry for my english. I need information regarding an error code E62.
I would like to know the potential causes.
On the doc I only have this : The two microprocessors receive different signals.
I tank you, for your help.
Showing items 1 - 4 of 4 results.
Good morning,
I replaced the traction variator.
Model FZ2007
The fault code has just reappeared.
Do you think the problem comes from a parameter?
thank you for your response
Good morning,
Thank you for your answers I will look into this today. And order a controller.
Hi error code e62 is the control needs to be replace, contorl has internal short
good luck,
If you do a search for the zapi eps controller you can find a manual for free.
If you have a zapi handheld you can connect it to the EPS box.
Also there should be a possibillity to enter the dashboard with a code.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.