Hi all
I have a fault 1953
On checking I get the following output X6.1 no load connected or over temperature.
Any ideas.
Thanks in advance
Showing items 1 - 6 of 6 results.
Thanks Tanel for getting back to me.
We got it sorted ,it was a broken wire in the tiller loom
Check tiller head switch, platform switch, saftey switch of the guard rails.
Also what is conmected to the x6.1?
Thanks for your help Fittermax.EJD 220 90502223 I now have a second truck down with same fault 1953. The truck will drive and lift at a very slow speed if you keep the crawl switch pressed.Otherwise the fault shows and nothing works.
Thanks
Hi.
No. tillerhead is plug and play. Are you sure it's an EJD??? If I check serial in JETI it's not...
Hi Fittermax, thanks for getting back to me model EJD 220 90531760.
We have fitted a new tiller still the same , we swapped a tiller head from a truck that was working and still the same fault.Do we need to calibrate the tiller head when we fitted it.
Thanks again,
Hi.
Serial nr. is for a EJC-112z and not EJD. Check your tillerhead...
Regards.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.