 Jungheinrich's EKS 210 and EKS 312 |
Birmingham, UKJungheinrich has launched two new order pickers that have been developed to meet the demand for flexibility and high picking performance over long shifts.
The Series 2 and 3 - EKS 210 and EKS 312 - vertical order pickers have an in-built RFID warehouse navigation system that enables the operator to receive picking instructions from the warehouse management system. Tests have shown that this feature can potentially boost productivity within the warehouse by up to 25%.
The instructions are accepted via an onboard terminal and the order pickers are automatically guided by the warehouse management system to the location where the goods are stored. The system ensures the order picker travels by the shortest route and at the optimal speed, which reduces energy consumption.
The automated system means the operator cannot go to the wrong location, thereby reducing picking mistakes.
The RFID transponders are the size of a thumbnail and are easily inserted into the floor within the aisles of the warehouse or distribution centre. The order picker is equipped with readers so when it passes over a transponder its position is pinpointed.
The EKS 210's chassis is 900 mm (2.9 feet) wide and less than 2.7 metres (8.8 feet) long and the truck has a top speed of 9 km/h (5.5 mph) and has a turning radius of just 1,550mm (4.9 feet). With a capacity of 1,000kg (2,200 pounds), it is capable of lifting to heights of up to 6 metres (19 feet). The EKS 210 is designed for safe use in wide aisles where more than one vehicle might be operating.
The EKS 312 is a very narrow aisle (VNA) machine capable of lifting loads of up to 1,200 kg (2,600 pounds). It has a maximum lift height of 9.5 metres (31 feet) and a top speed of 10.5 km/h (6.5 mph) . With a width of 1,000mm (3.2 feet) and at just over 3.3 metres (10.8 feet) long, it has a turning radius of 1.65 metres (5.4 feet).
Greene, NY, US The 7600 Reach-Fork truck from Raymond Corporation |
The Raymond Corporation has launched its new versatile and productive sit/stand reach truck.
The 7600 Reach-Fork truck allows the operator to sit or stand, depending on the task being performed. The operator can choose to use the cushioned suspended seat for longer runs.
This model features an ergonomic seat that flips up and out of the way to allow the operator to use the machine in a standing position. Two separate deadman pedals are featured - one for seated use and one for standing operation.
Susan Comfort, product manager, Class II products, for The Raymond Corporation, says this model was designed to accommodate different operator sizes. "An ergonomic operator compartment, and adjustable seat and steering column provide flexibility for different forklift operators."
Charlotte, NC, US Solideal's Max Duty skid steer loader wheel |
Tyre manufacturer and distributor Solideal has launched its latest solution for the compact construction industry.
The Max Duty skid steer loader wheel is built stronger and heavier for extended service life and fewer problems. The tyres can be fitted to the industry's most popular brands including Bobcat, Caterpillar, Case, John Deere and JCB.