Graphic and textual information of port machinery telehandler

Advertisement
- 7 Sep 2023 ( #1144 )
4 min read

XCMG Port Machinery telehandler

 

 

I.  Introduction:

Versatile functions, flexible mobility, comfortable operation, safe and reliable, energy-saving and efficient. Telescopic fork lift is a multifunctional equipment equipped with telescopic boom, fork or accessories, which is usually installed on the boom and can lift different goods. With excellent off-road performance, it can stretch and drive with load, and achieve multi-function expansion by combining different accessories.

 

 

(1) Lifting Type Telehandler:

Chassis type

Multi-functional off-road chassis,4WD transmission(front4/rear3), 4WS, Multi mode steering (front axle/crab/Circle), four wheel wet braking, frame turnover ± 10 °.

Working performance

Lifting height: 10m/14m/17m(2/3/4-section telescopic arms)

Rated load: 5t/5.5t/6.5t/8t(Center load distance600mm)

Driving performance

No-load: 32km/h, Gradeability>50%

Heavy-load: 25km/h, Gradeability>45%

Applicable scenarios

It is widely used in construction, agriculture, and industrial and mining enterprises for material handling, transport, and installation, taking into account the operating range and lifting performance, as well as the operation in all road conditions.

 

(2) City type Telehandler

Chassis type

Industrial chassis, mechanical box front axle drive (front 2/rear 2), rear wheel steering, front axle wet braking.

Working performance

Lifting height:  17m (4-section telescopic arms)/10m (2-section telescopic arms)

Rated load:  5.5t, 8t (Center load distance600mm)

Driving performance

No-load: 25km/h, Gradeability>28%

Heavy-load: 20km/h, Gradeability>22%

Applicable scenarios

Loading, unloading, handling, and installation of goods in relatively flat workplaces, it has a wide range of operations and applications, with relatively low procurement and maintenance costs.

 

(3)  Rotation telehandler

Chassis type

Multifunctional off-road chassis, hydrostatic 4WD (front 2/rear 2), 4WS, multi-mode steering (front axle/crab/Circle), four-wheel wet braking, frame rollover ± 10 °.

Working performance

Lifting height: 21-25m (4-section hexagonal telescopic arm)

Rated load: 4.5t, 6t, 7t (Center load distance600mm)

Driving performance

No-load: 40km/h, Gradeability>42%

Heavy-load: 32km/h, Gradeability>38%

Applicable scenarios

Taking into account the alternative application of comprehensive working conditions of cranes and climbing platforms, can construct under complex installation conditions, combined with multi-functional accessories to promote technique and safety improvement. 

 

(4) Heavy-load Telehandler

Chassis type

Multifunctional off-road chassis, hydrostatic 4WD (front 2/rear 2), 4WS, front axle/Crab/Circle, four-wheel wet braking, frame rollover ± 10 °.

Working performance

Lifting height: 10m (2-section telescopic arm)

Rated load: 12t, 15t, 23t (Center load distance 600mm)

Driving performance

No-load: 28km/h, Gradeability>40%

Heavy-load: 22km/h, Gradeability>28%

Applicable scenarios

Loading, unloading, handling, and installation of large goods in the entire road condition workplace, with strong working performance, expanded functions, and a wide range of applications. 

 

II. Leading technology, safe and reliable

(1) Excellent off-road trafficability and field adaptability

Lifting, rotation, and heavy-load types are equipped with high-performance off-road chassis, which has excellent driving and field adaptability, making it easy to achieve all-road driving operations.

(2) High strength steel bending butt welding main arm, Less welding seams, high performance, and longer service life

 

(3) Multifunctional meter, integrated 7-inch display screen, more complete information and convenient exchange

Intelligent meter, zoning display, comfort viewing;

7-inch LCD screen for real-time display and monitoring of vehicle operation status;

Interactive control facilitates troubleshooting and parameter adjustment.

(4) Intelligent performance meter, dynamically displaying operation status, ensuring operation safety

Real-time display of Fork position, boom angle, operating range, operating height, and lifting capacity, providing intuitive data and safer operation

In order to fit the user's habits, the lifting type product also retains the instructions on the boom for old product users.

(5) CAN bus power management system, real-time monitoring of the status of each circuit, convenient maintenance, no need for maintenance

Real time monitoring the voltage and current status of each circuit, and can be viewed through the display

Self-diagnosis, automatic error reporting, convenient for troubleshooting

Automatic connection after line restoration, shortening maintenance cycle

 

III. Flexible and multi-functional

XCMG standardized accessory interface, seamless and fast switching of multiple accessories, on-demand configuration, high attendance rate, and low maintenance cost.

 

IV.  XCMG Electric telehandler

XTF18010E Introduction

Vehicle type

Two axle chassis(4WD, multimode steering,front?rear axle Maximum static load 60t)

Endurance

8.7hours (282kwh Lithium iron phosphate battery, ensure adequate battery life)

Rated capacity

18t (Center load distance 600mm, the standard configuration of lifting height is 9m)

Speed

No-load: 30km/h

Heavy-load: 25km/h

 

(1) Excellent off-road performance

Dual motor 4WD technology, full load gradeability 35%?

Four wheel steering: three modes, Min steering radius 4.8m.

Vehicle body leveling: ± 10 ° turnover to meet different operating conditions.

(2) Comfortable operation

The constant power load sensing pump cooperates with the electric proportional valve to compensate for the load sensing valve, providing accurate flow distribution and stable composite action.

Multifunctional integrated handle, fully suspended seat, panoramic cab, high-power heating and cooling air conditioning, comfortable to work.

(3) Safe and reliable, convenient for maintenance

High precision load moment indicator system, with an accuracy of up to 3%, making the vehicle safe and reliable when loaded.

The battery management system contains more than 400 battery faulty alarms.

CAN bus management system, real-time monitoring of the status of each circuit, convenient maintenance. 

(4) Flexible and multi-functional

Multifunctional accessories

Allows customers to choose different accessories based on their own needs, and also supports customization of accessories.

Quick replacement

Switching between different accessories can be achieved within 3 minutes, greatly improving efficiency.

To learn more about impactful advertisements: download our media kit
The article on this page is supplied by and shown on behalf of an advertiser and does not in any way represent the views of Forkliftaction. The originators take full responsibility for their content. We advise you to contact the advertiser directly for any matters concerning this article.
Words of support …

After advertising with Forkliftaction.com, we got many enquiries regarding interest to be our distributor. Mostly from Europe and USA but including a few in ASEAN. We feel that the advertisement was useful and good for market expansion.

Lawrence Xu, Assistant Sales Manager - Resonac Asia Pacific Pte Ltd.
Upcoming in the editorial calendar
DIGITISED STOCK CONTROL AND FORKLIFTS
May 2024
PRODUCTION OF MATERIALS HANDLING EQUIPMENT IN NORTH AMERICA
Aug 2024

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Inside The News
This week’s news is electric! Continue reading
Upcoming in the editorial calendar
DIGITISED STOCK CONTROL AND FORKLIFTS
May 2024
PRODUCTION OF MATERIALS HANDLING EQUIPMENT IN NORTH AMERICA
Aug 2024
Inside The News
This week’s news is electric! Continue reading
Words of support …

I know I can count on them. They give valuable suggestions on the campaign planning, and to publish content is as easy as abc, as they take care of the material layout and check links. This is a great support.

Annalisa Castellini, Marketing Manager - Bolzoni S.p.A.
Hyster launches new models Surrey, United Kingdom

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Upcoming industry events …
September 4, 2024 - Blair Athol, South Australia, Australia
October 9-10, 2024 - Houston, United States
October 21-22, 2024 - Riyadh, Saudi Arabia
Inside The News
This week’s news is electric! Continue reading
Words of support …

Undoubtedly, peer experience plays a crucially important role in our industry and it is extremely valuable for us to be part of the platform, where industry professionals, as well as end users can discuss and learn more about the materials handling world.

Alexandra Artemova, Marketing Specialist - Rocla AGV Solutions
Hyster launches new models Surrey, United Kingdom
LA Port adds electric cargo top handlers Los Angeles, CA, United States

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Upcoming in the editorial calendar
DIGITISED STOCK CONTROL AND FORKLIFTS
May 2024
PRODUCTION OF MATERIALS HANDLING EQUIPMENT IN NORTH AMERICA
Aug 2024