Won't move either direction - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Won't move either direction

Raymond 20 R30TT

Hello everyone. I'm working on this unit s/n 020D-90-31367. The forward and reverse contactors kick in both directions but kick out in few seconds. Codes and recycle key to activate contactors again. there is a box in the contol panel on the right side. it shows a F. code when the contactor trips. Can't find any info on this unit. Wanting to know what the code is and how to check it.

Posted 26 Oct 2022 07:12
By Hdsprt
joined 12 Nov'15 - 43 messages
Illinois, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

20D OR 20I =I THINK 20I NEEDS A SETUP WITH THE UPPER BOX AND BOTTOM BOX=CONTROL HANDLE HAVING A POT TO CHECK THE WIRING

Posted 28 Oct 2022 23:42
By JKPAINTER
joined 26 Jul'17 - 72 messages
Ontario, Canada

Post a Reply Report this post

F simply means there is a fault, the most likely cause is worn or "stuck" drive motor brushes. Disconnect the battery and remove and inspect the drive motor brushes, clean the armature, and reinstall brushes ensuring they slide freely in there holders.
Hope this helps!

Posted 28 Oct 2022 15:48
By Mike_Sawchuk
joined 28 Oct'22 - 2 messages
British Columbia, Canada

Mike

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.