What is the problem, to start the lift truck old code press 1- 2222 new code 1-3333

Sir,
I have atlet power pallet PLL 180. I need pin code factory setting to start the truck or procedure to by pass the pin code.

REGARDS,
KASHIF.

Hi Guanajuato, Thanks for that, nice to see these posts do work. Have
a great New year. Regards Bernard

103 and 71 error code are hight-low voltage problem w/ your battery or broken harness probable wire is making ground to the chassis

what you whant to know about the atlet waht is the problem?

hey andy,

can you help me with the fault code list for UNS models?

regards,

Pankaj

Hi Andy,
Can you help with error code E103.
E71 comes on first and then E103.
Regards
Bernard

Hi Andy
Saw your reply to the other guy here, we have a customer with an Atlet UNS 200D. Every morning when switched on thru the keypad, it reads error code E71, If the hydraulics or traction are attempted, the machine shuts down on the back of eror code E115 or E116. After 1 or two resets, the truck behaves and runs fine for the rest of the day. Any idea's please??
Cheers
Iain

had massive computer problems..lol been a while since ive been on the forum, if you need anything atlet let me know..ok

only a few years behind, for you reply, but i work with 90% Atlet trucks PSH PSD CSD PLL UNN UNS UND etc
if you need any help still let me know
all the best
Andy r