Slow speed - Technical Troubleshooting discussion in Forkliftaction's forums

Linde (& Baker) E40:
Slow speed

Hello everybody!
In the company where I work we have a problem with a electrical Linde E40. When the operator switches it on the forklift goes well after he presses the forward or reserve pedal for the fisrt time. But when he tries to do it again the forklift goes very slowly. To go faster he needs to restart the engine and press the pedal. Does anyone knows what might be the problem??
Thank you so much for all your help!!!!

Posted 27 Apr 2007 20:00
Discussion started by vitor_m
Porto, Portugal

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

I have just recently aquired a linde walk behind lift model #ews40-02 it has a slow/weak drive when tapping directly into the main power cables it reads 12v dropping only to 11.3v when put in drive... it lifts very well since I've replaced the hydrolic shaft...I am wondering wethere the speed control might be burnt...any ideas also where could I download a wiring schematic for this

Posted 7 Jan 2016 13:39
Reply by Akbell1773
Pennsylvania, United States

Post a Reply Report this post

we need the full model and serial number from the data plate

Posted 9 Aug 2007 11:45
Reply by justinm
New York, United States

New York, New York its a heluva town..you know that The Bronx is up..and I'm Brooklyn down

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.