Crank to cam timing marks - Technical Troubleshooting discussion in Forkliftaction's forums

Unicarriers (& Nissan) 4 CYLINDER LPG:
Crank to cam timing marks

need to find out if the crank to cam is the dot to dot or some other method, read the chain is supposed to be colored or marked in some way. mid 90s nissan 50 with H20 propane, Thanks in advance,

Posted 7 May 2011 12:27
Discussion started by Rj1984
Arizona, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Thanks for the info, so I assume with paint marks gone a person just lines up the chain with the dots in those positions. Tried to get this from the local nissan lift truck and needless to say not very helpful. Again thanks.
John

Posted 10 May 2011 12:50
Reply by Rj1984
Arizona, United States

Post a Reply Report this post

Crank's timing gear dimple will be at the 12:00 O Clock position while the cam gear timing position will be at the 3:00 O Clock position with the paint marks on timing chain to match these positions.

Posted 10 May 2011 00:49
Reply by MEngr
Missouri, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.