Showing items 1 - 4 of 4 results.
the fortis of importjunkie's has a considerably different transmission than the XM seris of the original poster, I would suggest that importjunkie have the local hyster dealer do a transmission calibration as a first step. that will tell you if you have other problems.
Hi
Did you ever figure out what was going on with your forklift? My Hyster S40FTS is doing the same thing.
Thanks, Brian
i have a s50xl in the shop...and it does pretty much the same thing it has alot of power and when you drive it really lugs the engine down but not much driving power which to me has a torque converter problem...i suggest the first thing to check it the inching to make sure its not engaging at all and then still start checking transmission pressures first and trying a stall test if possible before jumping around..
Oh yeah this does it in both directions.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.