1. Home
  2. Forums
  3. Technical Troubleshooting

Hyster H80XM:
stops runnimg

a friend of mine has a lift that stops running after 15 seconds restarts and dies after 15 seconds any tips thank you. Don Watson.
  • Posted 9 Feb 2010 13:45
  • Discussion started by hornet
  • California, United States
nothing works
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
would be a big help to know make, model and serial numbers, this sounds to me like the LPG lockoff is not getting power in the "run" position of the igntion switch, but the reason for that depend (like Barfly Olaf says) on "emmission compliant or standard" as to where the power should be coming from. I would check the relays if it's a "CARB" truck
  • Posted 9 Feb 2010 23:39
  • Reply by edward_t
  • South Carolina, United States
"it's not rocket surgery"
Post a Reply Report this post
Is it emmission compliant or standard? Could be many things. Check oil pressure light and sensor
  • Posted 9 Feb 2010 21:03
  • Reply by Barfly_olaf
  • Nova Scotia, Canada
SEMPER FIDELIS
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

PREMIUM business

VETTER Industrie GmbH
The world's most comprehensive range of forks and the most intelligent sensor fork for more safety and efficiency.
VETTER Industrie GmbH
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Upcoming in the editorial calendar
ARTIFICAL INTELLIGENCE
May 2025
Ask us about editorial contribution
From the forum discussions …
"Remove the coils and ohm out the pins. Coils take a different number than regular 4y plugs... If code is there then it is an ecu issue."
ron_k, United States
Read & Post in our Forums
Forklift Diaries
Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Maersk opens French warehouse Hauts-de-France, France
Your Focus
Stuart Taylor
The critical role of managers in MH safety
Stuart Taylor
Read blog
From the forum discussions …
"Truck squeals when tilt, reach or side shift are used. Any ideas on why this would happen?"
marcos_m, United States
Read & Post in our Forums
Fact of the week
On average, people read 10-30% slower from a screen than from paper.