Need test specs for CAT EP16KT - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Need test specs for CAT EP16KT

Model ETB4B00690 The accelerator pedal is what I'm wanting to check out of the truck if possible. there is 4 pins on the pot/switch. Can someone tell me which pins are the pot & switch. and what ohm reading i should be reading. I have a code 51 and also just popped up a code 18. I just got this lift and have no info on it.

Just found this site. My first post!!

Posted 21 Jan 2010 09:41
Discussion started by Parkway
Texas, United States

pkwyls AT verizon DOT net

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Thanks, Shane
That would be very help helpful,
I will let you know how it turns out
Thanks again, James

Posted 22 Jan 2010 02:17
Modified 26 Feb 2010 11:20 by poster
Reply by Parkway
Texas, United States

pkwyls AT verizon DOT net

Post a Reply Report this post

Hi James
If you let me know your an email address I will mail you the info you need, if you post it you need to write it as "name at gmail dot com" other wise the site wont allow you to post it or you can add it normally to your profile or your signature.
Regards Shane

Posted 21 Jan 2010 18:47
Reply by controlelectric
Shropshire, United Kingdom

It takes years to build up trust, and only seconds to destroy it. controlelectrics.uk@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.