1. Home
  2. Forums
  3. Design & Engineering

Discussion:
easi code30

had jerky accl and would pull code 30 go into limited speed wouldnt relearn pot threw a new pot in relearned the jerky accl gone but still pulls code 30 after pulling in a1 in a look again way 30 not listed in my stuff truck is a older unit with a black box vehicle manager any info on code would be good or where on truck model or serial # are. THANKS
  • Posted 18 Dec 2009 13:39
  • Discussion started by rollover
  • British Columbia, Canada
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
model and serial number are either stamped on frame around drive unit or in frame under top cover.
Had a weird one like this and found that a drive unit mount bolt had snapped allowing unit to still travel badly, and wobble a lot. Thats why they called us....
  • Posted 22 Dec 2009 10:53
  • Reply by JonG
  • United States
Post a Reply Report this post
If it's an early reach truck (easi G) try checking the encoder or the belt for loosness etc
  • Posted 22 Dec 2009 02:39
  • Reply by martin_w
  • British Columbia, Canada
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Hyster-Yale reports Q1 revenue fall Cleveland, OH, United States
Upcoming industry events …
LET-a CeMAT ASIA event 2025
May 21-23, 2025 - Guangzhou, China
Europe Green Logistics Innovation Summit 2025
June 04-05, 2025 - Frankfurt, Germany
Transport Evolution East Africa
September 16-18, 2025 - Dar Es Salaam, Tanzania
More Events
From the forum discussions …
"Crown SC4000: No forward or reverse with 90% full lock... During a turn, in both directions, the forward and reverse stop when the steering is just about at full lock... any suggestions appreciated."
Brad_NZ, New Zealand
Read & Post in our Forums
Movers & Shakers
Jospeh E Creed Jospeh E Creed
Jospeh E Creed
CEO, Caterpillar Inc
Carole Bachmann
Secretary general, European Rental Association
Jean Lavigueur
Chairman of the Board of Directors, UgoWork
Linda Häkkilä
vice president, Investor Relations, Konecranes
Global Industry News
edition #1229 - 8 May 2025
In this week’s Forkliftaction News we look at the financial reports of some of the materials handling industry’s largest players including Hyster-Yale, KION and Hangcha... Continue reading
Upcoming industry events …
LET-a CeMAT ASIA event 2025
May 21-23, 2025 - Guangzhou, China
Europe Green Logistics Innovation Summit 2025
June 04-05, 2025 - Frankfurt, Germany
Transport Evolution East Africa
September 16-18, 2025 - Dar Es Salaam, Tanzania
More Events
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ

Showcased in the Virtual Expo

From the forum discussions …
"I, too, was fighting a JLG 2630S issue with the Pothole Switches. Thankfully I found this forum thread and saw the recommendation to enter the Machine Setup area..."
LorenS, United States
Read & Post in our Forums
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ