1. Home
  2. Forums
  3. Technical Troubleshooting

Linde D12 AP:
D12 ap suddenly going slow

Hello! I'm having some trouble regarding a D12 pallet stacker ( i think thats the right term). Anyways, after stacking a lot of pallets high and low, it suddenly doesn't want to go fast as usual, just in slow mode, just like when the forks or body are lifted. I suppose its a fork sensor thing? Already tried discinnecting it, and shorting the contacts but no help there. All the cells are equal in voltage.
  • Posted 1 Apr 2025 17:46
  • Discussion started by David_Sirotic
  • Croatia
Post a ReplyReport this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Showcased in the Virtual Expo

Last Week's Most Read
edition #1228 - 1 May 2025
Fact of the week
A 1904 lecture by scientist Elie Metchnikoff extolled the benefits of consuming yoghurt for halting the "intestinal putrefaction" which he believed causes aging. The press reported yoghurt as a cure for aging and the ensuing popularity is still with us today.
From the forum discussions …
"I, too, was fighting a JLG 2630S issue with the Pothole Switches. Thankfully I found this forum thread and saw the recommendation to enter the Machine Setup area..."
LorenS, United States
Read & Post in our Forums

PREMIUM business

Bolzoni SpA (Group HQ)
Manufacturer of Lift Truck Attachments, Forks and Lift Tables, with the most extensive range in the market.
Bolzoni SpA (Group HQ)
Upcoming in the editorial calendar
ARTIFICAL INTELLIGENCE
May 2025
Ask us about editorial contribution
Terberg BC182
Terberg BC182 2014
Balling, Denmark
Used - Sale
Hangcha FLDCXT160
Hangcha FLDCXT160
Braeside, Melbourne, Victoria, Australia
Hire
|
Upcoming industry events …
LET-a CeMAT ASIA event 2025
May 21-23, 2025 - Guangzhou, China
Europe Green Logistics Innovation Summit 2025
June 04-05, 2025 - Frankfurt, Germany
Transport Evolution East Africa
September 16-18, 2025 - Dar Es Salaam, Tanzania
More Events
From the forum discussions …
"Crown SC4000: No forward or reverse with 90% full lock... During a turn, in both directions, the forward and reverse stop when the steering is just about at full lock... any suggestions appreciated."
Brad_NZ, New Zealand
Read & Post in our Forums
Movers & Shakers
Jospeh E Creed Jospeh E Creed
Jospeh E Creed
CEO, Caterpillar Inc
Carole Bachmann
Secretary general, European Rental Association
Jean Lavigueur
Chairman of the Board of Directors, UgoWork
Linda Häkkilä
vice president, Investor Relations, Konecranes