REACH/TILT/SIDESHIFT PROBLEM - Technical Troubleshooting discussion in Forkliftaction's forums

Yale NR040AANL36SE095:
REACH/TILT/SIDESHIFT PROBLEM

I AM HAVING TROUBLE GETTING THE REACH FUNCTION TO WORK. THE TILT FUNCTION WORKS WHEN THE SS BUTTON IS PUSHED. THE REACH FUNCTION SEEMS TO WANT TO WORK BUT ONLY MOVES BACK ABOUT A HALF INCH. I TRIED REPLACING THE RELAYS, NO HELP. I REPLACED THE O-RINGS ON THE VALVES AND IT MADE IT WORSE. ANYBODY KNOW THESE VALVES AND HOW THEY WORK TOGETHER?

Posted 18 Aug 2009 20:53
Discussion started by jim_v
Michigan, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

I checked the cable out and had voltage to my solenoids. Any one else have an idea?

Posted 19 Aug 2009 08:38
Reply by jim_v
Michigan, United States

Post a Reply Report this post

I had a similar issue, chased it through and remember it being a problem in the over the mast cables going out to the hyd manifold on the carriage.
Hope that helps

Posted 18 Aug 2009 21:02
Reply by JonG
United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.