Hyster S35FT:
No fuel coming from EPR

I just replaced the EPR because it was leaking around the housing, once replaced I can't get fuel from the EPR thru the hose, the lock off valve is working and getting plenty of fuel to the EPR, Just not getting fuel to the mixer. Machine will crank and run on starter fluid.
  • Posted 3 Jan 2025 11:53
  • Discussion started by bruce864
  • Texas, United States
Showing items 1 - 1 of 1 results.
Bruce,

Since you had to remove a connector to install, verify all connections are good, clean and tight. Verify fuse 3 has not failed. This supplies power directly to the EPR. Since it starts on fluid, the EPR is no allowing fluid to enter the mixer. If everything checks good, suspect a bad EPR. Swap with a known good operating lift if you have a sister truck. Good Luck.
  • Posted 7 Jan 2025 00:02
  • Reply by Fishmech
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Fact of the week
The Michelin Guide with its star rating system originated in France in 1900. The guide was created as a marketing tool to encourage more car travel and consequently increase the demand for tyres. It initially contained maps, tire repair instructions, and lists of restaurants, hotels, and mechanics.
UN Forklift FBR25NQC3
HANGZHOU, Zhejiang, China
New - Sale
Taylor TX330S
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
USD159,500
Movers & Shakers
Manojit Acharya Manojit Acharya
APAC vice president, Jungheinrich
Senior VP direct sales and marketing, Daifuku Intralogistics America
Regional sales manager for Malaysia and Singapore, Libiao Robotics
Area sales manager - Spain, Trex Parts