Platform Self-Leveling - Technical Troubleshooting discussion in Forkliftaction's forums

Genie S-60X:
Platform Self-Leveling

Hi,
When lifting up or down the boom, the platform self-level doesn't work automatically until level the platform by manually. Any idea on my problem please?

Posted 1 Feb 2023 20:14
Modified 2 Feb 2023 00:41 by poster
Discussion started by Syed
Sindh, Pakistan

swasiquehussain at gmail dot com

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Dear swoop223,
I'll check the sensor. The model is S-60X and serial # S60X13-24883.

Posted 2 Feb 2023 23:32
Reply by Syed
Sindh, Pakistan

swasiquehussain at gmail dot com

Post a Reply Report this post

the problem might be the level sensor mounted inside the bracket where the basket rotator is. This sensor monitors the level of the basket and tells the hydraulics to move the lift and slave cylinders in such a way that it keeps the basket level while raising and lowering the boom.
check the wiring in the harness going to it and make sure there is no damage to the connections or the wires.
There is a test procedure but i need to know the complete model and serial number so i can get the right info from the tech literature.

Posted 2 Feb 2023 17:14
Reply by swoop223
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.