1. Home
2. Forums
3. Technical Troubleshooting
4. Yale
5. ERC030VAN36TE97

Yale ERC030VAN36TE97:
BDI Settings

Battery is good. I need to know what the settings are when setting up the BDI. In the manual where it shows setting the BDI it shows 152A. The factory default is 2A

• Posted 6 Jan 2022 09:51
• Reply by rc_w
• North Carolina, United States

Post a Reply Report this post

What might be the problem is that after charge and battery sits over night cells drop below 2.1 volts per cell so BDI will not reset. Try to put battery back on charge for approx half hour then plug into truck and see if BDI resets. If resets battery is weak and will probably need to be replaced soon hope this helps.

• Posted 5 Jan 2022 12:45
• Reply by Scott_
• Pennsylvania, United States

Scott

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.