Showing items 1 - 5 of 5 results.
take a good look at the bottom of the fuse box for broken cable
check wiring harness of fuse box running over motor
Thanks mate I'll do some further inspections and if I have no luck I'll give you a buzz thanks heaps
Thanks for that I will go over it all throughly I have visually looked at it but not pulled all the tape off the wiring yet, do you have an email address/ contact number I can contact you on if I don't find any wiring damage as the Linde dealer in my area is useless, I'm in Australia
Thanks Jake
Hi
I think D156 is a heart beat message error
In other words a can bus fault
That Probally the reason you have No drive or lift
Check the canbus wiring from the display to the controller in the rear panel
Will be a twisted pair so easy to see in the loom
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.