Won't power up - Technical Troubleshooting discussion in Forkliftaction's forums

Crown RM6025-45:
Won't power up

Turn key over and distribution board just gives a short beep every 2-3 seconds. Display does not come up. Checked key switch, access 1 connector, all fuses, distribution relay and not finding anything.

Posted 3 Feb 2021 04:31
Discussion started by NickN
North Carolina, United States

Post a Reply Report this post

Showing items 1 - 4 of 4 results.

Sort messages by:

What ended up being the issue? Currently having the same problem.

Posted 28 Oct 2024 22:56
Reply by Mike_Duncan
Ohio, United States

Post a Reply Report this post

Check the emergency disconnect switch.

Posted 5 Feb 2021 05:38
Reply by Arnie_Sandoval
Texas, United States

Arnie

Post a Reply Report this post

Make sure all access modules power connections are snug... had an identical issue on sp4000... turned out to be B- on access 5 loose connection.

Posted 4 Feb 2021 10:03
Reply by cubapnea
Florida, United States

If it ain't broken...you know...

Post a Reply Report this post

Assuming you've verified battery voltage is good, I would start checking CAN wiring

Posted 4 Feb 2021 04:46
Reply by Triggs
California, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.