Hello ,
The problem is with aLinde E 16C , 335- 02 series.The hidraulic functions is not working , the steering not working.
On the truck doctor at window (2) of lifting diagnose -( instant errors )it show me "19" error that say joystick must be teach- in.( i tryed to calibrate the lift / tilt joystick and stored the "ok" values , but in that window the " 19" error still apear..
At window( 3 )(fault code stored) in truck doctor , after i erase all errors , when i activate the lift / tilt joystick , apear error "29".The drive is working , the baterry is 50% charged , seat switch ok , cabin switch ok , hidraulic motor conexions ok , brush ok.
What cause can be ? It may be the power module ?
Thanks ,
Regards ,
Gabi
Showing items 1 - 3 of 3 results.
98% the powermodule give problem. It is integrated in the left drive module and a expensive part.
Thanks.Next week i will check also the insulance of electric motor.I don' t know if i can simulate the electric motor with 2 , 24 v in series , lightbulb.I supose that when i make the joystick command a fraction of a second should light the bulbs.The problem is that the engine has a speed sensor..and that I can't simulate
Hello , yes power module on leftside of counterweight defect. Before replace check cables and hydraulic motor
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.