I have an old Yale manual transmission forklift that has sat for a couple of months. It ran fine the last time I used it, but when I tried to put it into gear today there is just a grinding noise. It only has forward, neutral, and reverse in the floor. I removed the cover plate on the floor and the clutch pedal is engaging what I believe is the pressure plate from the engine. When the engine in off I can easily move it into either forward or reverse. Is the pressure plate stuck? Not sure what is going on. I have only had the lift for a about 4 months. Thanks for your help!
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.