Hyster S50XL:
Removing the GM 2.2 to replace the ring gear

Can anyone give me a clue on how to separate the motor from the trans, I have taken out all the bolts around the "bell housing" hyd pump is out, I'm sure the pump chain drive and all it's components come out with the motor, I can't seem to get the two halves to split, at about 3 and 9 o'clock, there are small gaps where it looks like one could wedge something in there to help split but I can't seem to get anything in there. Am I missing something. The torque converter is disconnected.
  • Posted 11 Sep 2020 05:43
  • Discussion started by raymond_j
  • California, United States
I can't fix stupid, but I can fix what stupid does.
Showing items 1 - 6 of 6 results.
Thanks for the reply, that's a good idea, that was my next step, wasn't sure if I was forgetting something that I should have disconnected.
If this had been a Nissan I would have been finished in around 4-5 hours. Gotta love them Hysters!
  • Posted 13 Sep 2020 12:00
  • Reply by raymond_j
  • California, United States
I can't fix stupid, but I can fix what stupid does.
C187v15452s
  • Posted 13 Sep 2020 11:55
  • Reply by raymond_j
  • California, United States
I can't fix stupid, but I can fix what stupid does.
Raise the transmission and engine assembly as high as possible. Stick a block under the transmission and lower the assembly. Then raise and lower again until you get a gap between the two. Pry apart from there.
  • Posted 13 Sep 2020 06:46
  • Reply by Fishmech
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.
Do you have a serial number, can look up a few things that may help. Thanks
  • Posted 13 Sep 2020 05:14
  • Reply by Fishmech
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.
The torque converter is loose from the flywheel. The engine and trans are definitely stuck together, I was hoping on some insight on techniques to unstick the two parts.
  • Posted 13 Sep 2020 04:52
  • Reply by raymond_j
  • California, United States
I can't fix stupid, but I can fix what stupid does.
Raymond,

You stated that you removed all the bolts, what about the torque converter where it bolts to the flywheel? You will need to remove the starter to get at these bolts. If you have these removed, sometimes the engine and transmission are stuck together. Also, look around for another bolt on the left side front the engine to the trans.
  • Posted 13 Sep 2020 02:01
  • Reply by Fishmech
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Machinery-onQ Listings
Jungheinrich ERC212
  • JungheinrichERC212
  • 2014 | Used - Sale
  • Germany
  • EUR 4,200
Brand-Unknown 40.000KG-SPREADER
  • Brand-Unknown40.000KG-SPREADER
  • 2017 | Used - Sale
  • Germany
  • EUR 22,000
Meyer DREIFACHPALETTENGABEL6-5612N
  • MeyerDREIFACHPALETTENGABEL6-5612N
  • 2014 | Used - Sale
  • Germany
  • EUR 2,000
Meyer DREIFACHPALETTENGABEL6-5612N
  • MeyerDREIFACHPALETTENGABEL6-5612N
  • 2015 | Used - Sale
  • Germany
  • EUR 2,000
Svetruck SPREADER
  • SvetruckSPREADER
  • 1993 | Used - Sale
  • Germany
  • EUR 25,000
Kalmar SEITENSPREADER
  • KalmarSEITENSPREADER
  • 2004 | Used - Sale
  • Germany
  • EUR 7,000
Fantuzzi SPREADER-SF31
  • FantuzziSPREADER-SF31
  • 2001 | Used - Sale
  • Germany
  • EUR 25,000
Elme 558-5293
  • Elme558-5293
  • 2003 | Used - Sale
  • Germany
  • EUR 15,000
Kalmar BRAMMA-TOOLSPREADER
  • KalmarBRAMMA-TOOLSPREADER
  • 2008 | Used - Sale
  • Germany
  • EUR 20,000
Svetruck 320
  • Svetruck320
  • 2008 | Used - Sale
  • Germany
  • EUR 18,000
Featured Business
Guangzhou Hesheng (Hongkong) International Trade Co., Ltd
Guangzhou Hesheng (Hongkong) International Trade Co., Ltd Wholesaler of forklift spare parts.
Machinery-onQ Listings
Fantuzzi SPREADER-SF31
  • FantuzziSPREADER-SF31
  • 2001 | Used - Sale
  • Germany
  • EUR 25,000
Meyer DREIFACHPALETTENGABEL6-5612N
  • MeyerDREIFACHPALETTENGABEL6-5612N
  • 2015 | Used - Sale
  • Germany
  • EUR 2,000
Kalmar BRAMMA-TOOLSPREADER
  • KalmarBRAMMA-TOOLSPREADER
  • 2008 | Used - Sale
  • Germany
  • EUR 20,000
Meyer DREIFACHPALETTENGABEL6-5612N
  • MeyerDREIFACHPALETTENGABEL6-5612N
  • 2014 | Used - Sale
  • Germany
  • EUR 2,000
Kalmar SEITENSPREADER
  • KalmarSEITENSPREADER
  • 2004 | Used - Sale
  • Germany
  • EUR 7,000
Svetruck 320
  • Svetruck320
  • 2008 | Used - Sale
  • Germany
  • EUR 18,000
Jungheinrich ERC212
  • JungheinrichERC212
  • 2014 | Used - Sale
  • Germany
  • EUR 4,200
Brand-Unknown 40.000KG-SPREADER
  • Brand-Unknown40.000KG-SPREADER
  • 2017 | Used - Sale
  • Germany
  • EUR 22,000
Elme 558-5293
  • Elme558-5293
  • 2003 | Used - Sale
  • Germany
  • EUR 15,000
Svetruck SPREADER
  • SvetruckSPREADER
  • 1993 | Used - Sale
  • Germany
  • EUR 25,000