Showing items 1 - 4 of 4 results.
No throttle in any position.
Does it have throttle in neutral ? I've had one before that had throttle in neutral and no throttle in gear had issue with wiring going to the mast height switch
No codes. I'll run through the other suggestions. Thanks
Do you have the plug in analyzer or is it the onboard one ? Codes? Corrosion on governor plug? Your analyzer will show throttle angle and should be 5.0 to 5.5. If the throttle sensor is out of range, again it will code out. Check fuses for ECU's. Do a voltage test thru fuse or in doubt replace the 3. Your dvom isn't always accurate to pick up a shorted fuse. Had one the other day showed.04 ohms. But 1.7 volts only to ECU.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.