No steering. No fault codes. - Technical Troubleshooting discussion in Forkliftaction's forums

BT Prime-mover OP HSE 1000:
No steering. No fault codes.

Hi.
I have a problem with a BT op1000. Serial- 405446AA/2001.
Machine won't steer and will only drive and operate hydraulics if both hand sensors are made. Normally only R/H sensor is required to operate machine with operators left hand free for steering.
No fault codes showing on A5 card. Swapped card onto other machine on site and worked fine and tried swapping battery's.
Fitted new steer potentiometer- Still no steering.
I have no information for these machines so any info would be greatly appreciated.
Cheers

Posted 2 Dec 2019 20:48
Discussion started by ManxForkTrucks
United Kingdom

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Check the aisle magnet sensor

Posted 19 Mar 2020 18:13
Reply by roshan_dsouza
Kuwait

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.