Jungheinrich etv114 battery 0% - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Jungheinrich etv114 battery 0%

Hi we have this jungheinrich reach truck which had stopped working after showing battery at 0%. We calibrate the bdi settings then works again. Recently went and changed the lisa display and 2 days later battery at 0% again. However the battery is actually 49v and under load drops to around 47 to 48v.

Can someone advise what they think could be causing this issue? Or which controller holds the bdi information.

Regards

Posted 4 Oct 2019 05:08
Discussion started by elektrodrive
West Midlands, United Kingdom

enquiries@elektrodrive.co.uk

http://www.facebook.com/pages/Elektrodrive/135894223166624

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Hi.
Do you have a serial nr.? YOM?
Regards, Max

Posted 7 Oct 2019 19:22
Reply by Fittermax
Denmark

Thank's for helping. Contact d-b-a@mail.com
P i s s Work, gone fishing

Post a Reply Report this post

Hi. We don't have another battery to v try. Settings are ok. Lisa display was changed. Battery seems to hold ok under load. I do still suspect battery now. Have asked to get battery people to come in and check battery.

Regards

Posted 6 Oct 2019 09:31
Reply by elektrodrive
West Midlands, United Kingdom

enquiries@elektrodrive.co.uk

http://www.facebook.com/pages/Elektrodrive/135894223166624

Post a Reply Report this post

Hi , do you have the battery parameters 1 - 11 set correct?

Sure battery oke? Do you have try it with a different battery they are used in other truck? Lisa holds the BDI info

Regards

Posted 4 Oct 2019 16:46
Reply by gc_d
Zuid-Holland, Netherlands

Regards gc_d

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.