Atlet load wheels - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Atlet load wheels

We have the following Atlet reach truck: -
120DTFVRA520U, YOM 1993 (not sure of variation though, nothing else on the data plate).

struggling to find out how to remove the load wheel shafts to change the wheels.

any body got any info?

Posted 13 Sep 2019 18:56
Discussion started by steve_h
West Midlands, United Kingdom

steve@mmh-forklifts.co.uk

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

If they are the same as UMS you have to pull pin out.
there is a 14/16? mm hole (tapped) down centre of pin, I made a puller from a piece of tube, a length of threaded bar and washers.
Can be very tight but there is a small hole on inside of leg that you can get punch through to assist.
hope this helps

Posted 20 Sep 2019 16:49
Reply by ian_h
United Kingdom

if i can help i will.

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.