Forward tilt slow - Technical Troubleshooting discussion in Forkliftaction's forums

Combilift C6000CB:
Forward tilt slow

grrrr... 2012 combilift cb6, forward tilt is slow. I have changed the fluids, replaced both hoses and cannot figure it out. back tilt and all other functions work great. anyone have any ideas?

Posted 1 Aug 2019 01:28
Discussion started by lawrence_b
Alabama, United States

Post a Reply Report this post

Showing items 1 - 4 of 4 results.

Sort messages by:

Best I can tell from the parts breakdown, The tilt ram seals are dual U-cups. If one of the rear cups is damaged it can cause this problem. Not sure what kind of anti cavitation valve is used on these. Could be an obstruction in the control valve.

Posted 6 Aug 2019 06:02
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

zero drift. hoses new and have found no external leaks.

Posted 6 Aug 2019 04:55
Reply by lawrence_b
Alabama, United States

Post a Reply Report this post

Have you checked for tilt drift? You might have a cylinder seal leak internally.

Posted 1 Aug 2019 23:03
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Did you check the pressure of the tilt (should be set to about 250 bar)? Is there any visible leaks?

Posted 1 Aug 2019 20:33
Reply by DavCom
County Monaghan, Ireland

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.