Hi! I've a customer that has an old Baker-Linde and is complaining about lack of steering assist in tight spaces. Our company has only recently started servicing this customers equipment, so a service history is out of the question. What I'd like to know, before I dig in too deep is the steering pump output pressure. Anyone?
Showing items 1 - 7 of 7 results.
Yes that is a Linde Baker truck built by Baker in the US. Power steering pressures typically run between 900 and 1200 PSI in most trucks.You would have to put a tee in line on the pressure side, turn the steering wheel to full lock position and hold it there momentarily to get the reading.
Thanx anyway for the quick response. This is my first post, although I've used this site for several years. Thanx again! Anyone else possibly have any info?
that must be an older model built before they went to the new serial number/series
wish i could help with this one but i have no info on that truck
maybe someone else here has something on this
Returned to customer location and rechecked data plate. Reads:
Model No. E25B
Serial No. 2658-0432
Sales
Order No. 6738901
Truck Typ. Electric
Contract 2658
Truck Wt
Less Batt. 7274
Hope this helps.
that doesn't look like the truck serial number
it should be about 12 digits
should look something like this example: H2X351K00xxx
Sorry, should have posted this in the original post. Serial # 2658-0432.
gonna need a serial number, it includes the series number which will be needed to get the correct information.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.