Engine stalls when wheels are turned in either direction all the way - Technical Troubleshooting discussion in Forkliftaction's forums

Komatsu FG25ST-11:
Engine stalls when wheels are turned in either direction all the way

Forklift runs good but when turning wheels in either direction all the way the forklift dies but will start right up after that

Posted 27 Jul 2019 10:18
Discussion started by Tonyp
Nevada, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

On the carburetor there is a "dash pot" with a vacuum hose hooked to it. It uses vacuum to sense when the engine is being strained while idling, and the rpm is dropping too low. It then pushes the throttle open some to prevent stalling. Check that to see if it is working and it can be adjusted for best operation and prevent stalling.

Posted 27 Jul 2019 20:35
Reply by mrfixit
New York, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.