Showing items 1 - 3 of 3 results.
Crown can tell you what the Model Number is, based on the Serial Number.
I worked at Crown for a long time; the machine that your working on is an FC; the "40" FC is a 4,000 lbs. lift capacity & the "50" is a 5,000lbs. lift capacity fork lift.
Not all Crown Field Branches are the same. Some are more professional than others.
The problem is that these plates are gone but I do have the serial #. Does Crown have a decoding system?
9A104 is almost always related to Crown 40 FC -or- 50 FC.
The Data Plate for the 40/50 FC is located very close to the Power Disconnect Handle (painted Red).
When you are sitting on the Operator's Seat, take a look at the Chassis Wall that is near/behind your Left boot; that is where the Data Plate is.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.