No Traction. No error Codes.. Discussion about troubleshooting B/t

B/t LPE200/8:
No Traction. No error Codes.

so i've been checking this pallet stacker for few days now. BT LPE200/8 Year:2012.

it has No Traction and No Fault/Error Codes showing. I've checked the Curtis Traction Controller and the Blinking LED Light is Normal/No Fault. and i already check its Sensors. all of them are Working. i also replace the Hand Accelerator Control, checked the Harness. all of them. Still nothing. I've run out of idea and i don't have a service manual. Any idea? Hydraulic is working fine. Horn is Working Fine. only the Traction is not working at all.

Posted 26 Aug 2018 21:58
Modified 26 Aug 2018 22:00 by poster
Discussion started by justin_d
RIYADH, SAUDI ARABIA, Saudi Arabia

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

check the tiller activation switch

Posted 11 Jan 2020 03:48
Reply by abhi_k
United Arab Emirates

Post a Reply Report this post

Is this a walkie OR a ride on LPE?

Its sound like the platform switch OR the link loop for the platform switch of its a walkie is faulty.

Posted 28 Aug 2018 20:36
Reply by Forkingabout
england, United Kingdom

Post a Reply Report this post

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.