Showing items 1 - 4 of 4 results.
Thanks a lot fella,s for your tips etc. the problem was the wiring harness from seat switch down to a 2 pin plug under the controller to get at it we had to remove counterweight the plug iins were all coroaded away. I checked a fbm fault code but it skiped a7 code are any of the other codes same as f b m if not can any of you e mail or fax the codes to me.Once again thanks.
Also check dead man switch possibly defective switch. Make sure there is no shorts in the wiring for the parking brake switch dead man switch seat switch. As has already been mentioned make sure you dont have the direction switch made and pedal depressed when starting up the truck.
Hello combar,
Make sure when you turn the key switch on that the forward/reverse lever is in neutral and you parking brake lever is on. I would check that first
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.