1. Home
  2. Forums
  3. Technical Troubleshooting

Hyster H65XM:
H65XM - 3.0 GM - I need an ECM??

Hi
I just purchased a 1996 Hyster H65XM with a GM 3.0 engine. It needs an engine ECM. The plug connector seems to be loose in the body. It cuts out (stalls)the engine when going over bumps or when the harness moves around. Any idea where I can get a new ECM? I believe the manual refers it as a MSTS. Are these different than automotive? Or can an automotive one be programmed? Thanks
  • Posted 3 Mar 2018 07:46
  • Discussion started by Jinxie
  • Manitoba, Canada
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
take it to a electronic repair place they should be able to put in a new connection.
  • Posted 9 Mar 2018 06:21
  • Reply by redbull
  • Queensland, Australia
Post a Reply Report this post
I believe you will need to get it from a dealer. The programming is specific to forklift applications.
  • Posted 6 Mar 2018 00:46
  • Reply by BREWSKI
  • Nebraska, United States
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

PREMIUM business

RAEDER-VOGEL
Innovative high-quality wheels and castors for the forklift industry.
RAEDER-VOGEL
From the forum discussions …
"Remove the coils and ohm out the pins. Coils take a different number than regular 4y plugs... If code is there then it is an ecu issue."
ron_k, United States
Read & Post in our Forums
Upcoming in the editorial calendar
ARTIFICAL INTELLIGENCE
May 2025
Ask us about editorial contribution
From the forum discussions …
"JLG 2630ES:...These lifts pots can be a hassle...if you replaced them..make sure you changed wiring..they come set normally open..."
Matthew_Reed, United States
Read & Post in our Forums

Showcased in the Virtual Expo

Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ

Showcased in the Virtual Expo

From the forum discussions …
"JLG 2630ES:...These lifts pots can be a hassle...if you replaced them..make sure you changed wiring..they come set normally open..."
Matthew_Reed, United States
Read & Post in our Forums
Fact of the week
On average, people read 10-30% slower from a screen than from paper.