Showing items 1 - 5 of 5 results.
We found the Char-lyn steer box leaking and steering shaft universal and bearings worn. Replaced worn parts. Works good.
Thanks guys, I will keep you posted
In all likelihood the steering gear is worn allowing the pressure to by pass. You can try removing the bottom cover from the steering gear and tightening the big nut one quarter turn.
does the "tightness" happen in relation to the position of the steering hand crank (wheel on the steering column) or in relation to the positions of the steering axle linkage (wheels on the ground) and does it change any if the steer avle wheels are up off the ground?
I would check the steer orbitrol along the column Rich
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.